Anti-static floor maintenance of ten kinds of maintenance method

Anti-static floor maintenance method

1. Attaches great importance to the environment of use: laying anti-static floor room temperature should be controlled at 15-35 degrees, humidity control in the 45% 75% RH;

2. Daily maintenance details:

(1) It is prohibited to use sharp instruments directly on the anti-static floor surface operation, to prevent damage on the surface of the antistatic performance and beautiful degree;

(2) Prohibit personnel from directly jumping from a high place fell to the floor, when handling floor barbaric operation is forbidden, damage the floor;

(3) When the mobile device is on the floor, the ban on direct drive devices on the floor, to prevent scratching, the correct approach is to lift equipment for handling;

(4) There May not be room for heavy equipment on the anti-static floor directly, such easy floor deformation caused by the load for a long time, the right thing to do is to place heavy equipment on the ground base.

3. After just laying on the floor, often maintain indoor air circulation.

4. Smooth overweight items should be put, furniture and weights are not hard-line push-pull drag, so as not to scratch wear-resisting layer surface.

5. Can't use sharp blow, floor surface.

6. I never soaked in water for the floor, and if there is an accident, should be timely with a dry dry mop the floor.

7. Keep the floor dry and clean, if there is a dirt floor surface, usually with no dripping wet mop wipe it dry.

8. Prevent the floor where cooking utensils the deformation.